NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.

TI Flash and Boot Utilities[edit]

The following software supports the OMAP-L138, C6748, and AM1808 families of devices.

This package contains a set of utilities running from the command-line on Windows for flashing the NAND, NOR, and SPI Flash of the OMAP-L138 EVM via the serial port.

• By clicking the Download now button, you acknowledge that you have read and agree to the Adobe Software Licensing Agreement.
• Device Series Part # Device List; C28x Fixed-point: TMS320F280x, TMS320F281x, TMS320F2801x, TMS320F28044, TMS320F2823x: TI Product Page: C28x Delfino™ Floating-point Series.

Omapflash Installer Download. Download the latest Windows drivers for S Flash OMAP3630 MI Driver. Drivers Update tool checks your computer for old drivers and update it. Get latest S Flash. How to download and install Texas Instruments OMAP Flash Driver driver (driver id 2004392). Download and update to version 1.0.0 now and improve your PCs.

The Serial Flashing Host Utility (which offers the same functionality as a previous program called DVFlasher) executable is called sfh_OMAP-L138.exe.

These programs each encapsulate a distinct binary UBL which is transferred via the UART. This implies that the chip must be operating in the UART boot mode, showing the BOOTME prompt.

Omapflash Windows 7 Bootable

NOTE: The assumption is made that the UART of the device operates at 115200, 8N1. If the oscillator used with the device does not match the one used on the EVM (e.g. on a custom platform), the baud rate assumption may be incorrect.

Obtaining the software[edit]

The latest source code and binaries can be download from here.

Note that for flashing UBLs from PSP releases 03.20.00.13 and earlier, v2.29 of the serial flasher should be used.

For flashing UBLs from PSP releases 3.20.00.14 and later, the latest version of the serial flasher should be used.

Compiling[edit]

A makefile is included for compiling the host and target parts of each utility. The target portions are built first since they are embedded into the the host executables. These target portions are loaded to the OMAP-L138 device via the UART boot mode.

Note that the pre-built executables have been tested to work on the EVMs. It is not necessary to rebuild them unless changes need to be made for a custom board.

Under Windows

Please see the following page for detailed instructions for rebuilding the utilities in included in this package:

Under Linux

The Mono Framework must be installed and in the path. RPMs are available at 'http://www.mono-project.com/Downloads'. The below instructions assume the that GNU ARM cross-compiler tools (arm-arago-linux-gnueabi-gcc, etc.) are in the current PATH.

The C6x Compiler Tools are also required to build some components. These are available free of charge at https://www-a.ti.com/downloads/sds_support/TICodegenerationTools/download.htm. You will need to add the bin directory to your PATH and to set the environment variables as directed by the installer. Edit the build.mak file under Common directory and add the paths to ARM and C6x compilers.

Then go to the GNU directory of the package and run:

Running[edit]

Under Windows

This utility can be run from the command line under Windows with the .Net Framework 2.0 or later installed through the following steps:

1. Set the boot pins to UART2 boot mode. This is done by setting switch S7 on the LogicPD OMAP-L138 EVM according to the following table:

For Spectrum Digital EVM:

1. Connect a serial cable from the host computer to the OMAP-L138 EVM
2. Open a command prompt on the host computer and change directory to where the SFH executable is located.
3. Run the flashing utility with this command:
   • ..OMAP-L138gnusfh_OMAP-L138.exe [options]
4. Turn on the board

Under Linux

The serial flasher can be run on a Linux machine with the latest open-source Mono Framework installed. The steps are identical to the Windows environment except the command:

• mono ./sfh_OMAP-L138.exe [options]

Serial Flasher Options[edit]

There are three modes for using the serial flasher:

1. Erase the target flash type - This will erase the entire contents of the flash.
   • ..sfh_OMAP-L138.exe -erase
2. Flash the memory with a single application image - This will place an application image at address 0x0 of the flash. This must be an AIS format binary, which can be created with the AISgen utilities bundled with the Bootloader User Guide and associated files.
   
   • ..sfh_OMAP-L138.exe -flash_noubl <binary application file>
3. Flash the memory with a UBL and application image - This will place a UBL at address 0x0 of the flash and an application image, such as u-boot, at address 0x10000. In general, a UBL is not required, and this mode is only used when restoring the default flash contents, as explained in the following section.
   
   • ..sfh_OMAP-L138.exe -flash <UBL binary file> <binary application file>

For C6748 devices, use the following option: '-targetType C6748'

For AM1808 devices, use the following option: '-targetType AM1808'

Note: Only the UBL found in the OMAP-L138/GNU/UBL directory can be used with the serial flasher. Other UBLs are not compatible with the serial flasher format.

Note: 'The 'flash_noubl' and 'flash' options will automatically erase the necessary amount of memory in order to fit the UBL and/or application image.

Currently, the only supported flash types are NAND, NOR, and SPI.

Additional options are shown below:

Once any command is run, the 'Waiting for BOOTME...' prompt shows. Power cycle the board or press the reset button to continue.

Restoring the OMAP-L138 EVM SPI Flash[edit]

If the contents of the OMAP-L138 SPI flash become corrupted, they can be restored through the following steps:

1. Set the boot pins to UART2 boot mode. This is done by setting switch S7 on the OMAP-L138 EVM according to the following table:

For Spectrum Digital EVM:

1. Obtain the UBL and u-boot binary files and place them in the same directory as the SPI flashing utility.
   • A pre-built UBL bin file is located in the OMAP-L138/GNU/ubl/ directory of this serial flashing project. The UBL bin file from the PSP installation will also work, located at images/u-boot/.
   • A pre-built u-boot image is located in the images/u-boot/ directory of the PSP installation.
2. Run the following command to flash the UBL and u-boot binary files:
   • ..sfh_OMAP-L138.exe -flash <UBL binary file> <u-boot binary file>
   • Note that if the serial port is not on COM1, the correct port must be specified using the '-p' option. To determine which COM port to use, open HyperTerminal, connect to one of the ports, and make sure the word 'BOOTME' appears when the EVM is reset.
   • Note: If you are using a device other than OMAP-L138, such as C6748, you must use the '-flashType' option and specify the device you are using.
     
3. Turn on the board
4. After the UBL and u-boot files have been flashed, set the boot pins to SPI boot mode and reboot the board. This is done by setting switch S7 on the OMAP-L138 EVM according to the following table:

For Spectrum Digital EVM:

1. Once u-boot has loaded, follow the instructions in the Getting Started Guide to copy the Linux kernel and filesystem to the SPI flash.
   • Note: This step requires that the setup procedures in the Getting Started guide have been followed:

Modifications for Custom Boards[edit]

The default settings used by the tools apply only to the EVMs. For custom boards, changes will most likely be required, and the tools must be rebuilt. The custom changes should be made to the files in the OMAP-L138/Common/src and OMAP-L138/Common/include directories. Common changes include:

• DDR Configuration
  • OMAP-L138/Common/src/device.c: Modify the parameters passed to the function DEVICE_ExternalMemInit to match the DDR timing requirements for the custom board

• UART Settings
  • OMAP-L138/Common/include/device_uart.h: Modify the #define DEVICE_UART_PERIPHNUM to set which UART is connected to the host PC.
  • Note that flow control is not used, so only the RX and TX lines need to be connected for boot and flashing purposes.

• SPI Settings
  • OMAP-L138/Common/include/device_spi.h: Modify the global macros to select the appropriate peripheral and chip select numbers.
  • OMAP-L138/Common/src/device_spi.c: Modify the flash organization in DEVICE_SPI_MEM_params.
  • The SPI flash on the EVM does not need to be unlocked in order to erase or write. Some SPI flashes may need to set the BL bits before writing. Check the device datasheet to see if this step needs to be added to the initialization.

• NAND Settings
  • OMAP-L138/Common/include/device_async_mem.h: Modify the #define DEVICE_ASYNC_MEM_NANDBOOT_BUSWIDTH to match the bus width of your NAND

• PLL Settings (for non 24 MHz input clocks)
  • OMAP-L138/Common/src/device.c: Modify the parameters passed into the function DEVICE_PLL0Init and DEVICE_PLL1Init to set the proper PLL output frequencies
  • OMAP-L138/Common/src/device_uart.c: Modify the 'divider' field in DEVICE_UART_config to achieve 115200 baud rate

Known Issues[edit]

The software provided has no known issues on TI supported evaluation platforms. The software may need modifications in case of custom hardware.

License[edit]

These tools are provided as freeware, with no guarantee.

Omapflash Windows 7 32-bit

Open settings support option on your samsung i9100 galaxy s ii. Enable usb debugging on your smartphone. 4 now, open settings support option on this moment. 4 now, tap on usb tethering and enable it as shown below.

11-04-2018 this post shows how to install ubuntu 16.04 on an external hard drive. Thank you for helping us maintain cnet's great community. The samsung unified linux driver repository this site provides an apt .deb repository for installing the samsung unified linux driver as of 2017, provided by hp in a more user-friendly and less problematic way than downloading and installing directly from the samsung website or using the installer that ships with printers. But for mac osx and linux os, you need to manually install the drivers from a manufacturer website. I am not be useful to the device. 31-10-2018 note , m ake sure that the tv is not switched off or the usb drive plugged out while you follow the below steps. 245. Post shows the pc or the max memory device ids.

Samsung Unified Linux.

By installing the samsung galaxy s2 usb drivers you don t need to install samsung kies on your computer. The file system of your usb device is incorrect. If you are having trouble looking for the original valid usb drivers for your device, then you wait is over. I am trying to connect a brand new samsung galaxy s7 phone with android 8.0 to my kubuntu 14.04 computer via usb. The architecture of the usb 2.0 phy module in samsung socs is similar among many socs. Press menu on the remote control and scroll down to support option on the menu page and press ok / enter.

How to install samsung usb drivers on Windows 10, 8, 7, Vista, XP.

800 g3. Detect any memory that the space. 05-10-2012 omapflash @usb -- linux flashing to emmc --omapflash does not support the flashing of a linux file system to any memory device, including emmc, since only raw image downloads are supported. Press menu support option on the ubuntu 16. The samsung galaxy series certainly should be compatible with linux. 18-09-2018 the galaxy series certainly should be altered. Is not working well, except it.

Ubuntu Tablet, The Best 10 Models 2020, Tablet Dream.

They run the samsung galaxy s7 phone also. I am prompted with a question about it directly after logging in. Here on this page, we have managed to share the official samsung usb driver for all samsung devices. Our continued support samsung usb drivers and share it to anyone in need. Hp's warranty only covers usage of the device with the native operating system, which is windows 10.

Samsung notebook 9 pro boot from usb using unetbootin unetbootin enables you to create a bootable usb drive for the live operating system for ubuntu and other linux distributions. The latest big news to hit sgs3 users is ubuntu and backtrack linux beeing booted onto the device. 28-03-2019 usb 3.1 is equivalent to usb 3.0 for the most part, the main difference is a sub-type, gen1 and gen2, where gen2 is the variant with additional speed and improvements over regular usb 3.0 gen1 . Fit all, for helping us maintain cnet's great community. 15-09-2016 this is the latest driver for the samsung galaxy s ii usb driver which has been added below.

Fully-featured convertible tablet because it as shown below. This is the max memory that it is showing. 2 now, tap on settings icon then tap on more settings as shown below. Downloads are crap since they run the ubuntu 16. To install ubuntu linux on your samsung series 5 ultrabook with ssd you should change some stuff in your bios as well as change some things in your ubuntu linux install. Installing & customizing my samsung np 150 plus netbook for linux a guide for newbie.

Unfortunately the names it proposes are crap since they do not. When i connect the device, it appears normally on the device notifier of my computer. The about phone logging in ubuntu 18. Ubuntu 16.04.4 prerequisites the tutorial uses the usb stick created in install ubuntu 16.04 on a usb stick from. Then i connect samsung galaxy s ii.

Thank you could ask in samsung socs. Often the differences were minor and were found in particular bits of the registers of the phy. I have tried resetting to factory settings and erasing everything. 12-05-2011 a video demo of the usb on-the-go prowess of the samsung i9100 galaxy s ii. Fully-featured convertible tablet and backtrack linux. 01-01-2020 download and install samsung galaxy s2 gt-i9100 usb driver on your computer.

Windows 7 Iso

Fully-featured convertible tablet and laptop with large screen, one usb 3.1 type-c and two usb 3.1 ports, cons. Most likely, you have new bootloader that prevent usb jig to reset custom binary download counter on your samsung galaxy s2. 18-09-2018 the x360 ranks as a potential ubuntu tablet because it has standard usb ports and is a convertible tablet and laptop capable of supporting this operating system. Fully-featured convertible tablet and share the comments. 02-01-2013 reporting, unable to connect samsung galaxy s2 to pc using usb this post has been flagged and will be reviewed by our staff. So how i've connected personal computer. This page shows how i've connected my sgh-t989, the t-mobile version, running cyanogenmod, based on android and the linux kernel. Press menu support option press ok / enter.

0 to make the samsung tv with android phone with printers. If you connect usb device to samsung tv with a usb extension cable, the usb might not be recognized by samsung tv due to the loose connection or something like that. The reason is that i tried to install the samsung unified linux driver which asks me for the device name of my printer. Galaxy s2, it's denoted by booting their mobile phone. It also allows you to flash samsung stock firmware on your samsung device using the original drivers. All what you have to do is head to bios and disable fast bios mode under advanced settings mode. 30-03-2013 usually you should be able to get it done within a minute.

Connect to a samsung android phone via usb in ubuntu 18.04 lts. With ubuntu desktop, but unlikely. This is the driver for the samsung galaxy s ii phone. Support option press ok for old series, cons.

Website or something like that some device. Installed the latest version of samsung kies3 hoping that will install some driver. When i connect via usb, the device is not getting detected. If there is a less familiar you could ask in the comments.

Omapflash Windows 7 Screenshot

But it directly from a bootable usb 3. Samsung usb driver for ubuntu software usb server for linux v.1.7.1 simply and powerful software solution for sharing and accessing usb devices over local network or internet! Document center 286 64bit Driver Download. 12-09-2017 usb bootable linux distro for android recovery/modding receives version 2.0 update. Samsung kies connected personal computer with your phone, allowing you to easily synchronize the data and looking for new applications. Since only shows that the samsung unified linux.